Aironet AP4500 Guía de usuario descargar pdf (Pagina 65)

Installing the Software

3-25

Ad hoc system operation is accomplished with the following

group of variables.

Table 3.11 - Ad Hoc Keywords

Keywords Value Description

JOINNETTO 0 – 0xFFFF Optional – determines the amount of

time that an ad hoc station will scan

before starting its own network

(default is 10,000 Kµsec [10 sec]).

BEACONPERIOD 0 – 0xFFFF Optional – speciﬁes the beaconing

interval in Kµsec. (default is 100

Kµsec).

DSCHANNEL 0-14 Optional – this parameter is valid

only for a node that starts a network.

This is the channel identiﬁer specify-

ing the frequency to communicate

on. For all other nodes, the radio will

scan for the proper frequency.

Default is 0, which will cause the

radio to pick a default channel

appropriate for its programmed

carrier set. Any other value (1-14)

will be validated against the

programmed carrier set and rejected

if invalid.

ATIMDURATION Between 0 and

less than the

beacon interval

Ad hoc only – speciﬁes the length of

time for ATIMs following a beacon

(this value must be non-zero for PSP

ad hoc operation) (default is 5).

This value is only used when start-

ing a new network. When joining a

network, the value currently in use

will be adopted.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 106 107

Sin comentarios

Aironet AP4500 Guía de usuario Pagina 65