Aironet BR2000-E Guía de usuario descargar pdf (Pagina 37)

Installing the Aironet Wireless Client for Ethernet or Serial 1 - 5

2. Set the terminal to 9600 Baud, No-Parity, 8 data bits, 1 Stop bit, and

ANSI compatible.

NOTE: If you are using a Serial Client, proceed to “Attaching the AC/DC

Power Pack and Powering On”.

Installing the Ethernet Connection

1. Make sure the unit is disconnected from the power source.

2. Plug the RJ-45 connector into the 10BaseT port (Twisted Pair) as

shown in Figure 1.4.

3. Connect the other end of the Twisted Pair cabling to the LAN

connection (such as the crossover part of a hub for the Multi-Client

or wired LAN for the Universal Client).

Figure 1.4 - Ethernet Cabling Connection

POWER

10BaseT

CONSOLE/RS232

RESET

ANT

UCE.BK Page 5 Wednesday, February 10, 1999 12:10 PM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 179 180

Sin comentarios

Aironet BR2000-E Guía de usuario Pagina 37