Aironet PC3500 Guía de usuario descargar pdf (Pagina 66)

If Loading Firmware for Windows 3.11 and DOS:

The FLSH3545.COM program is used to load new firmware to

systems operating under DOS and Windows 3.11.

To load new firmware:

1. Before upgrading the firmware, uninstall the driver or

reboot the computer and do not load the driver during the

boot process.

2. Type

FLSH3545

at the DOS prompt.

3. Enter the option (see Table below).

NOTE: If using card and socket services, no

options should be required.

4. Type the filename of the new firmware.

5. Press

Enter

Utility Description

-p Specifies the starting address for a block of

64 consecutive 16-bit I/O ports. Make sure

the block of I/O addresses does not overlap

the address of another device in the

machine. This can be used to override a

card service assignment. If card services are

not used, this will default to 0x140.

-s Optional – If card services are used, this

parameter is ignored. If card services are not

used, this is the PC Card socket the PC3500

is inserted into (default is 0).

-m If card services are used, this parameter is

ignored. If card services are not used, this is

a block of memory the driver will use to

view the PC3500 CIS (default is 0xD000).

-q Quiet Mode, no messages will appear while

flash upgrade is in progress.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 84 85

Sin comentarios

Aironet PC3500 Guía de usuario Pagina 66