Aironet PC3500 Guía de usuario descargar pdf (Pagina 79)

Power Save Mode

Power Save Mode is recommended for devices where power

consumption is a major concern, such as small battery powered

devices. Power Save Mode causes the Access Point to buffer

incoming messages. The PC3500 must wake up periodically and

poll the Access Point to see if there are any buffered messages

waiting. The PC3500 can request each message and then go back

to sleep.

Fast Power Save Mode

Fast Power Save Mode (Fast PSP Mode) switches between PSP

and CAM based on network traffic. When retrieving a high

number of packets, Fast PSP Mode will switch to CAM to

retrieve the packets. Once the packets are retrieved, it switches

back to PSP.

Network Parameters

User modifiable parameters are limited to the choice of MAC

Address:

•

Factory MAC Address

: This is the default MAC address

which is guaranteed to be unique. Unless you have a very

good reason to define your own MAC address, it is

STRONGLY RECOMMENDED that you use the factory

MAC address.

•

User Defined MAC Address

: If you must define your own

MAC address, you can enter it here. If you do not use a

unique value, you may not be able to communicate to your

wired network or you may disrupt other network devices. For

this reason, it is STRONGLY RECOMMENDED that you

use the factory MAC address. The MAC address is 12

hexadecimal digits. You do not need to use delimiters, but

you can use spaces or the colon character.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 85

Sin comentarios

Aironet PC3500 Guía de usuario Pagina 79